
Prestige 202H User’s Guide
7.2Internet Access Setup
The table following this menu contains instructions on how to configure your router for Internet access.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Pri Phone #= 1234
Sec Phone #=
My Login= ChangeMe
My Password= ********
My WAN IP Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set= N/A
Telco Options:
Transfer Type= 64K
Multilink= Off
Idle Timeout= 100
Press ENTER to Confirm or ESC to Cancel:
Enter the phone number of your ISP.
Enter login name and password.
| Figure |
| Table |
|
|
FIELD | DESCRIPTION |
|
|
ISP’s Name | Enter the name of your Internet Service Provider, e.g., myISP. This information is for |
| identification purposes only. |
|
|
Pri Phone and Sec | Both the Primary and the Secondary Phone number refer to the number that the |
Phone # | router dials to connect to the ISP. |
|
|
My Login | Enter the login name given to you by your ISP. |
|
|
My Password | Enter the password associated with the login name above. |
|
|
My WAN IP Addr | Some implementations, especially the UNIX derivatives, require the WAN link to |
| have a separate IP network number from the LAN and each end must have a unique |
| address within the WAN network number. If this is the case, enter the IP address |
| assigned to the WAN port of your router. |
| NOTE: This is the address assigned to your local router WAN, not the remote router. |
| If the remote router is a router, then this entry determines the local router Rem IP |
| Addr in Menu 11.1. |
Internet Access Setup |