Prestige 202H User’s Guide

10.3 Setting Up Default Dial-in

From the Main Menu, enter 13 to go to Menu 13 – Default Dial-in Setup. This section describes how to configure the protocol-independent fields in this menu. For the protocol-dependent fields, refer to the appropriate chapters.

Menu 13 - Default Dial-in Setup

Telco Options:

IP Address Supplied By:

CLID Authen= Required

Dial-in User= Yes

PPP Options:

IP Pool= No

IP Start Addr= N/A

Recv Authen= CHAP/PAP

IP Count(1,2)= N/A

Compression= Yes

Session Options:

Mutual Authen= No

O/G Username=

Edit Filter Sets= No

O/G Password= ********

 

Multiple Link Options:

 

Max Trans Rate(Kbps)= 128

 

Callback Budget Management:

 

Allocated Budget(min)=

 

Period(hr)=

 

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

 

 

 

Figure 10-1 Menu 13 Default Dial-in SetupTable 10-2 Menu 13 Default Dial-in Setup

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Telco Options: CLID

This field sets the CLID authentication parameter for all incoming

Required

Authen

calls. There are three options for this field:

 

 

None – No CLID is required.

 

 

Required – CLID must be available, or the Prestige will not

 

 

answer the call.

 

 

Preferred – If the CLID is available then CLID will be used;

 

 

otherwise, authentication is performed in PPP negotiation.

 

PPP Options:

 

 

 

 

 

10-2

Dial-in Setup