
Prestige 202H User’s Guide
Step 2. When Menu 11 appears as shown in the following figure, enter the number of the remote node that you wish to configure.
Menu 11 - Remote Node Setup
1. ChangeMe (ISP, NAT)
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter Node # to Edit:
FigureWhen Menu 11.1. – Remote Node Profile appears, fill in the fields as described in the following table to define this remote profile. The following table shows you how to configure the Remote Node Menu.
Menu 11.1 - Remote Node Profile
Rem Node Name= nodename | Edit PPP Options= No |
Active= Yes | Rem IP Addr= 0.0.0.0 |
Call Direction= Outgoing | Edit IP= No |
Incoming: | Telco Option: |
Rem Login= N/A | Transfer Type= 64K |
Rem Password= N/A | Allocated Budget(min)= 0 |
Rem CLID= N/A | Period(hr)= |
Call Back= N/A | Schedules= |
Outgoing: | Carrier Access Code= |
My Login= ChangeMe | |
My Password= ******** | Toll Period(sec)= 0 |
Authen= CHAP/PAP | Session Options: |
Pri Phone #= 1234567 | Edit Filter Sets= No |
Sec Phone #= | Idle Timeout(sec)= 100 |
Press ENTER to Confirm or ESC to Cancel:
Edit PPP Options in menu 11.2.
Edit IP Options in menu 11.3.
Edit Filter Sets in menu 11.5.
Remote Node Configuration |