Prestige 202H User’s Guide

Start dialing for node <LAN_2>

### Hit any key to continue.###

$$$ DIALING dev=2 ch=0

$$$ OUTGOING-CALL phone(123)

$$$ CALL CONNECT speed<64000> type<2>

Prestige on LAN 1 calls Prestige on LAN 2.

chan<0>

$$$ LCP opened

$$$ PAP sending user/pswd

$$$ LCP closed

$$$ Recv'd TERM-REQ

$$$ Recv'd TERM-ACK state 4

$$$ LCP stopped

$$$ ANSWER CONNECTED ch=7743bc

Disconnect

PAP authentication

$$$ LCP opened

$$$ IPCP negotiation started

$$$ IPCP opened

Prestige on LAN 2 calls back.

Successful connection

Figure 10-11 Testing Callback With Your Connection

10.7.2 Configuring With CLID in LAN-to-LAN Application

The only difference between callback with CLID (Calling Line Identification) and callback described above is that you do not pay for the first call, i.e., when the Prestige on LAN 1 calls the Prestige on LAN 2. The Prestige (LAN 2) looks at the ISDN D-channel and verifies that the calling number corresponds with that configured in menu 11. If they do, the Prestige (LAN 2) hangs up and calls the Prestige on LAN 1 back.

10-12

Dial-in Setup