
Prestige 202H User’s Guide
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
BACP= Enable
Multiple Link Options:
BOD Calculation= Transmit or Receive
Base Trans Rate(Kbps)= 64
Max Trans Rate(Kbps)= 64
Target Utility(Kbps)=
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
FigureFIELD | DESCRIPTION | EXAMPLE |
|
|
|
Encapsulation | Select CISCO PPP only when this remote node is a Cisco | Standard PPP |
| machine; otherwise, select Standard PPP. |
|
|
|
|
Compression | Turn on/off Stac Compression. The default for this field is | No |
| No. |
|
BACP | Your Prestige negotiates the Secondary Phone number for | Enable (default) |
| a |
|
| Allocation Control Protocol) is enabled; otherwise it uses |
|
| the Secondary Phone number set in Menu 11.1. |
|
|
|
|
Multiple Link Options: |
|
|
|
|
|
BOD Calculation | Select the direction of the traffic you wish to use in | Transmit or |
| determining when to add or subtract a link. Options for this | Receive |
| field are: Transmit or Receive, Transmit, Receive. | (default) |
Base Trans Rate (Kbps) | Select the base data transfer rate for this remote node in | 64 |
| Kbps. There are two choices for this field: 64 where only |
|
| one channel is used or, 128 where two channels are used |
|
| as soon as a packet triggers a call. |
|
Max Trans Rate (Kbps) | Enter the maximum data transfer rate allowed for this | 64 |
| remote node. This parameter is in kilobits per second. |
|
|
|
|
Remote Node Configuration |