P782M G.SHDSL Bridge
FIELD | DESCRIPTION | YOUR INFO |
|
|
|
VPI | Enter your Virtual Path Identifier here. |
|
|
|
|
VCI | Enter your Virtual Channel Identifier here. |
|
|
|
|
My Login | Enter the login name assigned by your ISP (for PPP |
|
| only). |
|
|
|
|
My Password | Enter the password associated with your ISP assigned |
|
| My Login (for PPP only). |
|
|
|
|
3.11.1 Peak Cell Rate (PCR)
Peak Cell Rate (PCR) is the maximum rate at which the sender can send cells. This parameter may be lower (but not higher) than the maximum line speed. 1 ATM cell is 53 bytes (424 bits), so a maximum speed of 832 Kbps gives a maximum PCR of 1962 cells/sec. This rate is not guaranteed because it is dependent on the line speed.
If the PCR is set to the default of “0”, the system will assign a maximum value
that correlates to your upstream line rate.
From the main menu, enter 4 to display Menu 4 — Internet Access Setup, as shown next.
Menu 4 - Internet Access Setup
ISP's Name= Change Me
Encapsulation= RFC 1483
Multiplexing=
VPI #= 0
VCI #= 33
Peak Cell Rate (PCR)= 0
My Login= N/A
My Password= N/A
Press ENTER to confirm or ESC to cancel:
Figure 3-5 Internet Access Setup
The following table contains instructions on how to configure your Prestige for Internet access.
Internet Access |