P782M G.SHDSL Bridge

 

Menu 11 - Remote Node Setup

1.

ChangeMe (ISP)

2.

________

3.

________

4.

________

5.

________

6.

________

7.

________

8.

________

9.

________

10.

________

11.

________

12.

________

Enter Node # to Edit:

Figure 4-1 Menu 11 — Remote Node Setup

4.1.2 Encapsulation and Multiplexing Scenarios

For Internet access you should use the encapsulation and multiplexing methods used by your ISP. For LAN-to-LAN applications, e.g., branch office and corporate headquarters, prior agreement on methods is necessary because encapsulation and multiplexing cannot be automatically determined. Which methods to use depends on how many VCs you have and how many different network protocols you need. The extra overhead that ENET ENCAP encapsulation entail makes them a poor choice in a LAN-to-LAN application. Here are some examples of more suitable combinations in such an application.

Scenario 1. One VC, Multiple Protocols

PPP(RFC-2364) encapsulation with VC-basedmultiplexing is the best combination because no extra protocol identifying headers are needed. The PPP protocol already contains this information.

Scenario 2. One VC, One Protocol (IP)

Selecting RFC 1483 encapsulation with VC-basedmultiplexing requires the least amount of overhead (0 octets). However, if there is a potential need for multiple protocol support in the future, it may be safer to select PPP encapsulation instead of RFC-1483, so you do not need to reconfigure either computer later.

Scenario 3.

Multiple VCs

If you have an equal number (or more) of VCs than the number of protocols, then select RFC 1483 encapsulation and VC-basedmultiplexing.

4-2

Remote Node Configuration