P782M G.SHDSL Bridge

LED

COLOR

STATUS

DESCRIPTION

 

 

 

 

 

 

Off

The Prestige does not have 10Mb Ethernet connection.

 

 

 

 

xDSL

Green

On

The Prestige has a successful Ethernet connection.

 

 

 

 

 

 

Blinking

The Prestige is sending/receiving data.

 

 

 

 

 

 

Off

The Prestige is not sending/receiving data.

 

 

 

 

2.2Rear Panel and Connections of the Prestige 782

The following figure shows the rear panel of your Prestige.

Figure 2-2 Prestige 782 Rear Panel and Connections

2.2.1 xDSL Port

Connect the Prestige (port labeled xDSL) to the telephone jack using the RJ-11 cable (supplied).

2.2.2 Console Port

For the initial configuration of your Prestige, you need to use terminal emulator software on a computer and connect it to the Prestige through the console port. Connect the 9-pin end of the console cable to the console port of the Prestige and the other 9-pin end to a serial port (COM1, COM2 or other COM port) of your computer. You can use an extension RS-232 cable if the enclosed one is too short.

2-2

Hardware Installation and Initial Setup