P782M G.SHDSL Bridge
Remote File | This is the filename on the Prestige. The filename for the firmware is “ras” and for the |
| configuration file, is |
|
|
Binary | Transfer the file in binary mode. |
|
|
Abort | Stop transfer of the file. |
|
|
Refer to section 0 to read about configurations that disallow TFTP and FTP over WAN.
8.2.8 Backup Via Console Port
Back up configuration via console port by following the HyperTerminal procedure shown next. Procedures using other serial communications programs should be similar.
Step 1. Display menu 24.5 and enter “y” at the following screen.
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):
Figure 8-3 System Maintenance — Backup Configuration
Step 2. The following screen indicates that the Xmodem download has started.
You can enter
Starting XMODEM download...
Figure 8-4 System Maintenance — Starting Xmodem Download Screen
Step 3. Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the following screen.
Firmware and Configuration File Maintenance |