P782M G.SHDSL Bridge

Menu 11.6 - Remote Node ATM Layer Options

VPI #= 8

VCI #= 38

Peak Cell Rate (cell/sec)= 5500

Sustain Cell Rate (cell/sec)= 0

Maximum Burst Size (cell)= 0

ENTER here to CONFIRM or ESC to CANCEL:

Figure 5-2 Menu 11.6 — Remote Node ATM Layer Options

Refer to Chapter 3 for field descriptions found in the last figure.

The following table contains instructions on how to configure your Prestige for Internet access.

Table 5-1 Fields in Menu 11.6 — Remote Node ATM Layer Options

FIELD

DESCRIPTION

EXAMPLE

VPI #

Enter the Virtual Path Identifier (VPI) that the telephone

8

 

company gives you.

 

VCI #

Enter the Virtual Channel Identifier (VCI) that the telephone

35

 

company gives you.

 

 

 

 

Peak Cell Rate (PCR)

This is the maximum rate at which the sender can send cells.

0

 

Type the PCR.

 

 

 

 

Sustain Cell Rate

Sustained Cell Rate is the mean cell rate of a bursty, on-off

0

(SCR)= 0

traffic source that can be sent at the peak rate, and a

 

 

parameter for burst-type traffic. Type the SCR; it must be less

 

 

than the PCR.

 

 

 

 

Maximum Burst Size

Refers to the maximum number of cells that can be sent at the

0

(MBS)= 0

peak rate. Type the MBS. The MBS must be less than 65535.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

Remote Node TCP/IP Configuration

5-3