P782M G.SHDSL Bridge

Step 1. In menu 11.1, make sure the Edit Bridge field is set to Yes and then press [ENTER] to display

Menu 11.3 — Remote Node Network Layer Options (shown next).

Menu 11.3 - Remote Node Network Layer Options

Ethernet Addr Timeout(min)= 0

Enter here to CONFIRM or ESC to CANCEL:

Figure 4-4 Remote Node Network Layer Options

The next table shows you how to configure remote node network layer options.

Table 4-3 TCP/IP-related Fields in Menu 11.1 — Remote Node Profile

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Ethernet Addr

Type the time (in minutes) for the Prestige to retain the Ethernet

10

Timeout

Address information in its internal tables while the line is down. If this

 

(min.)

information is retained, your Prestige will not have to recompile the

 

 

tables when the line comes back up.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press [ENTER] to confirm or [ESC] to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

4.3Remote Node Filter

In menu 11.1, make sure the Edit Filter Sets field is set to Yes and then press [ENTER] to display Menu

11.5 — Remote Node Filter (shown next).

Menu 11.5 - Remote Node Filter

Input Filter Sets: device filters=

Output Filter Sets: device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 4-5 Menu 11.5 — Remote Node Filter

4-6

Remote Node Configuration