P782M G.SHDSL Bridge

7.4Command Interpreter Mode

The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Access can be by Telnet or by a serial connection to the console port, although some commands are only available with a serial connection. See the included disk or the zyxel.com web site for more detailed information on CI commands.

Enter 8 from Menu 24 — System Maintenance. A list of valid commands can be found by typing help or

?at the command prompt. Type “exit” to return to the SMT main menu when finished.

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Firmware Update

8.Command Interpreter Mode

Enter Menu Selection Number:

Figure 7-7 Command Mode in Menu 24

Copyright (c) 1994

- 2002 ZyXEL Communications Corp.

ras> ?

 

 

 

 

Valid commands are:

 

device

ether

sys

exit

wan

poe

 

xdsl

atm

fpga

ip

 

ppp

bridge

hdap

 

 

 

 

emitest>

 

 

 

 

Figure 7-8 Valid Commands

7-6

System Information and Diagnosis