P782M G.SHDSL Bridge

331 Enter PASS command Password:

230 Logged in ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit

Figure 8-2 FTP Session Example

8.2.4 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.

Table 8-2 General Commands for GUI-based FTP Clients

 

COMMAND

DESCRIPTION

 

 

 

 

Host Address

Enter the address of the host server.

 

 

 

 

Login Type

Anonymous.

 

 

This is when a user I.D. and password is automatically supplied to the

 

 

server for anonymous access. Anonymous logins will work only if your

 

 

ISP or service administrator has enabled this option.

 

 

Normal.

 

 

The server requires a unique User ID and Password to login.

 

 

 

 

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

 

 

 

 

Initial Remote Directory

Specify the default remote directory (path).

 

 

 

 

Initial Local Directory

Specify the default local directory (path).

 

 

 

 

 

 

 

 

TFTP and FTP over WAN will not work when you have an SMT console session

running.

8.2.5 Backup Configuration Using TFTP

The Prestige supports the up/downloading of the firmware and the configuration file using TFTP (Trivial File Transfer Protocol) over LAN. Although TFTP should work over WAN as well, it is not recommended.

To use TFTP, your computer must have both telnet and TFTP clients. To backup the configuration file, follow the procedure shown next.

8-4

Firmware and Configuration File Maintenance