P782M G.SHDSL Bridge

6.4Filter Configuration Example

Let us look at a sample filter. See the supporting disk for more sample filters.

Step 1. Enter 21 from the main menu to open Menu 21 — Filter Set Configuration. Step 2. Enter the index of the filter set you want to configure (in this case 3).

Step 3. Enter a descriptive name or comment in the Edit Comments field (in this case, test).

Step 4. Press [ENTER] at the message “Press [ENTER] to confirm or [ESC] to cancel” to open Menu 21.3 — Filter Rules Summary.

Step 5. Enter 1 to configure the first filter rule. When you press [ENTER] to confirm, the following screen appears. Note that there is only one filter rule in this set.

Make the entries in this menu as shown next.

6-8

Filter Set Configuration