P782M G.SHDSL Bridge
o Console port using terminal emulation software
The remainder of this user’s guide shows you how to configure the Prestige for Internet access using SMT screens. There are also some sections in this guide that also focus on using Telnet to configure the Prestige.
2.5.1 Initial Screen
When you turn on your Prestige, it performs several internal tests as well as line initialization. After the initialization, the Prestige asks you to press [ENTER] to continue, as shown.
Copyright (c) 1994 - 2002 ZyXEL Communications Corp. initialize ch =0, ethernet address: 00:a0:c5:01:23:45
Wan Channel | init ............ | done |
Press ENTER | to continue... |
|
Figure 2-3 Power-On Display
2.5.2 Entering Password
The login screen appears after you press [ENTER], prompting you to enter the password, as shown next.
For your first login, enter the default password “1234”. As you type the password, the screen displays an “X” for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your Prestige will automatically log you out and will display a blank screen. If you see a blank screen, press [ENTER] to display the login screen again.
Enter Password : XXXX
Figure 2-4 Login Screen
Hardware Installation and Initial Setup |