Chapter 23 IP Source Guard
Figure 100 IP Source Guard Static Binding
The following table describes the labels in this screen.
Table 66 IP Source Guard Static Binding
LABEL | DESCRIPTION |
MAC Address | Enter the source MAC address in the binding. |
|
|
IP Address | Enter the IP address assigned to the MAC address in the binding. |
|
|
VLAN | Enter the source VLAN ID in the binding. |
|
|
Port | Specify the port(s) in the binding. If this binding has one port, select the |
| first radio button and enter the port number in the field to the right. If this |
| binding applies to all ports, select Any. |
|
|
Add | Click this to create the specified static binding or to update an existing one. |
|
|
Cancel | Click this to reset the values above based on the last selected static |
| binding or, if not applicable, to clear the fields above. |
|
|
Clear | Click this to clear the fields above. |
|
|
Index | This field displays a sequential number for each binding. |
|
|
MAC Address | This field displays the source MAC address in the binding. |
|
|
IP Address | This field displays the IP address assigned to the MAC address in the |
| binding. |
|
|
Lease | This field displays how long the binding is valid. |
|
|
Type | This field displays how the Switch learned the binding. |
| static: This binding was learned from information provided manually by an |
| administrator. |
|
|
VLAN | This field displays the source VLAN ID in the binding. |
|
|
Port | This field displays the port number in the binding. If this field is blank, the |
| binding applies to all ports. |
|
|
Delete | Select this, and click Delete to remove the specified entry. |
|
|
Cancel | Click this to clear the Delete check boxes above. |
|
|
188 |
| |
| ||
|
|
|