Chapter 6 System Status and Port Statistics
Figure 28 Status > Port Details
The following table describes the labels in this screen.
Table 7 Status: Port Details
LABEL | DESCRIPTION |
Port Info |
|
|
|
Port NO. | This field displays the port number you are viewing. |
|
|
Name | This field displays the name of the port. |
|
|
Link | This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for |
| 1000Mbps) and the duplex (F for full duplex or H for half duplex). It also shows the |
| cable type (Copper or Fiber). |
|
|
Status | If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port |
| (see Section 11.1 on page 99 for more information). |
| If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it |
| displays STOP. |
|
|
LACP | This field shows if LACP is enabled on this port or not. |
|
|
TxPkts | This field shows the number of transmitted frames on this port |
|
|
RxPkts | This field shows the number of received frames on this port |
|
|
Errors | This field shows the number of received errors on this port. |
|
|
Tx KB/s | This field shows the number kilobytes per second transmitted on this port. |
|
|
Rx KB/s | This field shows the number of kilobytes per second received on this port. |
|
|
| 65 |
|
|