Chapter 32 Cluster Management
32.2.1.1 Uploading Firmware to a Cluster Member Switch
You can use FTP to upload firmware to a cluster member switch through the cluster manager switch as shown in the following example.
Figure 156 Example: Uploading Firmware to a Cluster Member Switch
C:\>ftp 192.168.1.1 Connected to 192.168.1.1.
220 Switch FTP version 1.0 ready at Thu Jan 1 00:58:46 1970 User (192.168.0.1:(none)): admin
331 Enter PASS command Password:
230 Logged in ftp> ls
200 Port command okay
150 Opening data connection for LIST
1 | owner | group | 3042210 | Jul 01 | 12:00 ras | |||
owner | group | 393216 | Jul 01 | 12:00 config | ||||
1 | owner | group | 0 | Jul 01 | 12:00 | |||
owner | group | 0 | Jul 01 | 12:00 | ||||
226 | File | sent OK | in 0.00Seconds 297000.00Kbytes/sec. | |||||
ftp: 297 | bytes | received | ||||||
ftp> bin | I OK |
|
|
|
|
|
| |
200 | Type |
|
|
|
|
|
| |
ftp> put | 370lt0.bin |
|
| |||||
200 | Port | command okay |
|
|
|
| ||
150 | Opening data connection for STOR | |||||||
226 | File | received OK |
|
|
|
| ||
ftp: 262144 bytes sent in 0.63Seconds 415.44Kbytes/sec. ftp>
The following table explains some of the FTP parameters.
Table 104 FTP Upload to Cluster Member Example
FTP PARAMETER | DESCRIPTION |
User | Enter “admin”. |
Password | The web configurator password default is 1234. |
ls | Enter this command to list the name of cluster member switch’s |
| firmware and configuration file. |
360lt0.bin | This is the name of the firmware file you want to upload to the |
| cluster member switch. |
This is the cluster member switch’s firmware name as seen in the | |
| cluster manager switch. |
This is the cluster member switch’s configuration file name as seen | |
| in the cluster manager switch. |
32.3 Clustering Management Configuration
Use this screen to configure clustering management. Click Management > Cluster Management > Configuration to display the next screen.
260 |
| |
| ||
|
|
|