10
Filtering
This chapter discusses MAC address port filtering.
10.1 Configure a Filtering Rule
Filtering means sifting traffic going through the Switch based on the source and/or destination MAC addresses and VLAN group (ID).
Click Advanced Application > Filtering in the navigation panel to display the screen as shown next.
Figure 45 Advanced Application > Filtering
The following table describes the related labels in this screen.
Table 21 Advanced Application > FIltering
LABEL | DESCRIPTION |
Active | Make sure to select this check box to activate your rule. You may temporarily deactivate |
| a rule without deleting it by deselecting this check box. |
|
|
Name | Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for |
| identification only. |
|
|
| 97 |
|
|