|
|
|
|
| Chapter 3 Hardware Overview |
| Table 2 | LED Descriptions (continued) | |||
| LED |
| COLOR | STATUS | DESCRIPTION |
| 1000 |
| Green | Blinking | The system is transmitting/receiving to/from an Ethernet network. |
| (GS- |
|
|
|
|
|
|
| On | The link to a 1000 Mbps Ethernet network is up. | |
| 3012F) |
|
| ||
|
|
|
|
| |
|
|
|
| Off | The link to a 1000 Mbps Ethernet network is down. |
|
|
|
|
|
|
| 100 (GS- |
| Amber | Blinking | The system is transmitting/receiving to/from an Ethernet network. |
| 3012F) |
|
|
|
|
|
|
| On | The link to a 100 Mbps Ethernet network is up. | |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| Off | The link to a 100 Mbps Ethernet network is down. |
|
|
|
|
|
|
| MGMT |
|
|
|
|
|
|
|
|
|
|
| 10 |
| Green | Blinking | The system is transmitting/receiving to/from an Ethernet device. |
|
|
|
|
|
|
|
|
|
| On | The port is connected at 10Mbps. |
|
|
|
|
|
|
|
|
|
| Off | The port is not connected at 10Mbps or to an Ethernet device. |
|
|
|
|
|
|
| 100 |
| Amber | Blinking | The system is transmitting/receiving to/from an Ethernet device. |
|
|
|
|
|
|
|
|
|
| On | The port is connected at 100Mbps. |
|
|
|
|
|
|
|
|
|
| Off | The port is not connected at 100Mbps or to an Ethernet device. |
|
|
|
|
|
|
3.4 Configuring the Switch
You may use the embedded web configurator or command line interface to configure the Switch. If you’re using the web configurator, you need Internet Explorer 5.5 and later or Netscape Navigator 6 and later.
You can access the command line interface using a terminal emulation program on a computer connected to the Switch console port (see Section 3.1.1 on page 42) or access the Switch using Telnet.
The next part of this guide discusses configuring the Switch using the web configurator.
| 47 |
|
|