Chapter 25 Two Rate Three Color Marker

25.2.3 Configuring Two Rate Three Color Marker Settings

Use this screen to configure trTCM settings. Click the Advanced Application > trTCM to display the screen as shown next.

"You cannot enable both trTCM and Bandwidth Control at the same time.

Figure 120 Advanced Application > trTCM

The following table describes the labels in this screen.

Table 78 Advanced Application > trTCM

LABEL

DESCRIPTION

Active

Select this to activate trTCM (Two Rate Three Color Marker) on the Switch. The Switch

 

evaluates and marks the packets based on the trTCM settings.

 

 

Mode

Select color-blindto have the Switch treat all incoming packets as uncolored. All incoming

 

packets are evaluated against the CIR and PIR.

 

Select color-awareto treat the packets as marked by some preceding entity. Incoming

 

packets are evaluated based on their existing color. Incoming packets that are not marked

 

proceed through the Switch.

 

 

Port

This field displays the index number of a port on the Switch.

 

 

*

Settings in this row apply to all ports.

 

Use this row only if you want to make some settings the same for all ports. Use this row first

 

to set the common settings and then make adjustments on a port-by-port basis.

 

Note: Changes in this row are copied to all the ports as soon as you make

 

them.

 

 

210

 

GS-3012/GS-3012F User’s Guide