Chapter 3 Hardware Overview

Figure 14 Transceiver Removal Example

3.1.4 Management Port

The MGMT (management) port is used for local management. Connect directly to this port using an Ethernet cable. You can configure the Switch via Telnet or the web configurator.

The default IP address of the management port is 192.168.0.1 with a subnet mask of 255.255.255.0.

3.2 Rear Panel

The following figures show the rear panels of the GS-3012 AC and DC power models followed by the GS-3012F AC and DC power models. The rear panel contains the power receptacle and a connector for external backup power supply.

Figure 15 Rear Panel: GS-3012 AC Power Model

Figure 16 Rear Panel: GS-3012 DC Power Model

Figure 17 Rear Panel: GS-3012F AC Power Model

Figure 18 Rear Panel: GS-3012F DC Power Model

3.2.1Power Connector

"Make sure you are using the correct power source as shown on the panel.

 

45

GS-3012/GS-3012F User’s Guide