Chapter 4 The Web Configurator
Figure 22 Resetting the Switch: Via the Console Port
Bootbase Version: V3.1 03/08/2007 18:36:17 RAM:Size = 64 Mbytes
DRAM POST: Testing: 65536K OK DRAM Test SUCCESS !
FLASH: Intel 64M
ZyNOS Version: V3.80(LH.0)b4 05/31/2007 20:43:39
Press any key to enter debug mode within 3 seconds.....................
Enter Debug Mode
Starting XMODEM upload (CRC mode)....
CCCCCCCCCCCCCCCC
Total 393216 bytes received. Erasing..
................................................................
OK
The Switch is now reinitialized with a default configuration file including the default password of “1234”.
4.7 Logging Out of the Web Configurator
Click Logout in a screen to exit the web configurator. You have to log in with your password again after you log out. This is recommended after you finish a management session for security reasons.
Figure 23 Web Configurator: Logout Screen
4.8 Help
The web configurator’s online help has descriptions of individual screens and some supplementary information.
Click the Help link from a web configurator screen to view an online help description of that screen.
| 57 |
|
|