Chapter 12 Bandwidth Control
12.2 Bandwidth Control Setup
Click Advanced Application > Bandwidth Control in the navigation panel to bring up the screen as shown next.
Figure 54 Advanced Application > Bandwidth Control
The following table describes the related labels in this screen.
Table 32 Advanced Application > Bandwidth Control
LABEL | DESCRIPTION |
Active | Select this check box to enable bandwidth control on the Switch. |
|
|
Port | This field displays the port number. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. |
| Use this row first to set the common settings and then make adjustments |
| on a |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
Ingress |
|
Rate |
|
|
|
Active | Select this check box to activate commit rate limits on this port. |
|
|
Commit | Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for |
Rate | the incoming traffic flow on a port. The commit rate should be less than the |
| peak rate. The sum of commit rates cannot be greater than or equal to the |
| uplink bandwidth. |
|
|
Active | Select this check box to activate peak rate limits on this port. |
124 |
| |
| ||
|
|
|