Chapter 6 System Status and Port Statistics
The following table describes the labels in this screen.
Table 9 Status > Port Details
LABEL | DESCRIPTION |
Port Info |
|
|
|
Port NO. | This field displays the port number you are viewing. |
|
|
Name | This field displays the name of the port. |
|
|
Link | This field displays the speed (either 10M for 10Mbps, 100M for 100Mbpsl, |
| 1000M for 1000 Mbps, and 10G for 10 Gbps) and the duplex (F for full |
| duplex or H for half duplex). It also shows the cable type (Copper or |
| Fiber). |
|
|
Status | If STP (Spanning Tree Protocol) is enabled, this field displays the STP state |
| of the port (see Section 11.1.3 on page 107 for more information). |
| If STP is disabled, this field displays FORWARDING if the link is up, |
| otherwise, it displays STOP. |
|
|
LACP | This field shows if LACP is enabled on this port or not. |
|
|
TxPkts | This field shows the number of transmitted frames on this port |
|
|
RxPkts | This field shows the number of received frames on this port |
|
|
Errors | This field shows the number of received errors on this port. |
|
|
Tx KB/s | This field shows the transmission speed of data sent on this port in |
| kilobytes per second. |
|
|
Rx KB/s | This field shows the transmission speed of data received on this port in |
| kilobytes per second. |
|
|
Up Time | This field shows the total amount of time the connection has been up. |
|
|
Tx Packet |
|
The following fields display detailed information about packets transmitted.
TX Packets | This field shows the number of good packets (unicast, multicast and |
| broadcast) transmitted. |
|
|
Multicast | This field shows the number of good multicast packets transmitted. |
|
|
Broadcas | This field shows the number of good broadcast packets transmitted. |
t |
|
|
|
Pause | This field shows the number of 802.3x Pause packets transmitted. |
|
|
Rx Packet |
|
The following fields display detailed information about packets received.
RX | This field shows the number of good packets (unicast, multicast and |
Packets | broadcast) received. |
|
|
Multicast | This field shows the number of good multicast packets received. |
|
|
Broadcas | This field shows the number of good broadcast packets received. |
t |
|
|
|
Pause | This field shows the number of 802.3x Pause packets received. |
|
|
Control | This field shows the number of control packets received (including those |
| with CRC error) but it does not include the 802.3x Pause packets. |
|
|
TX Collision |
|
The following fields display information on collisions while transmitting.
60 |
| |
| ||
|
|
|