Chapter 24 IP Source Guard

 

Table 73 DHCP Snooping Configure (continued)

 

LABEL

DESCRIPTION

 

 

Apply

Click Apply to save your changes to the Switch’s run-time

 

 

 

memory. The Switch loses these changes if it is turned off or

 

 

 

loses power, so use the Save link on the top navigation panel to

 

 

 

save your changes to the non-volatile memory when you are

 

 

 

done configuring.

 

 

 

 

 

 

Cancel

Click this to reset the values in this screen to their last-saved

 

 

 

values.

 

 

 

 

 

24.5.1 DHCP Snooping Port Configure

Use this screen to specify whether ports are trusted or untrusted ports for DHCP snooping.

Note: The Switch will drop all DHCP requests if you enable DHCP snooping and there are no trusted ports.

You can also specify the maximum number for DHCP packets that each port (trusted or untrusted) can receive each second. To open this screen, click

Advanced Application > IP Source Guard > DHCP Snooping > Configure > Port.

Figure 100 DHCP Snooping Port Configure

 

219

GS2200-48 User’s Guide