Chapter 29 DHCP
29.4.2 Configuring DHCP Global Relay
Configure global DHCP relay in the DHCP Relay screen. Click IP Application > DHCP in the navigation panel and click the Global link to display the screen as shown.
Figure 124 IP Application > DHCP > Global
The following table describes the labels in this screen.
Table 92 IP Application > DHCP > Global
LABEL | DESCRIPTION |
Active | Select this check box to enable DHCP relay. |
|
|
Remote | Enter the IP address of a DHCP server in dotted decimal notation. |
DHCP |
|
Server 1 .. 3 |
|
|
|
Relay Agent | Select the Option 82 check box to have the Switch add information (slot |
Information | number, port number and VLAN ID) to client DHCP requests that it relays to |
| a DHCP server. |
|
|
Information | This |
| Setting > General Setup screen. |
| Select the check box for the Switch to add the system name to the client |
| DHCP requests that it relays to a DHCP server. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
| 253 |
|
|