Chapter 8 VLAN
8.5.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a port. See Section 8.1 on page 79 for more information on static VLAN. Click the VLAN Port Setting link in the VLAN Status screen.
Figure 34 Advanced Application > VLAN > VLAN Port Setting
The following table describes the labels in this screen.
Table 19 Advanced Application > VLAN > VLAN Port Setting
LABEL | DESCRIPTION |
GVRP | GVRP (GARP VLAN Registration Protocol) is a registration protocol that |
| defines a way for switches to register necessary VLAN members on |
| ports across the network. |
| Select this check box to permit VLAN groups beyond the local Switch. |
|
|
Port Isolation | Port Isolation allows each port to communicate only with the CPU |
| management port and the uplink ports but not communicate with each |
| other. This option is the most limiting but also the most secure. |
|
|
Port | This field displays the port number. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all |
| ports. Use this row first to set the common settings and then make |
| adjustments on a |
| Note: Changes in this row are copied to all the ports as soon as you |
| make them. |
|
|
| 87 |
|
|