Chapter 32 Access Control
computer(s)” for each service in the Remote Management screen (discussed later). Click Access Control to go back to the main Access Control screen.
Figure 163 Management > Access Control > Service Access Control
The following table describes the fields in this screen.
Table 111 Management > Access Control > Service Access Control
LABEL | DESCRIPTION |
Services | Services you may use to access the Switch are listed here. |
|
|
Active | Select this option for the corresponding services that you want to allow to |
| access the Switch. |
|
|
Service | For Telnet, SSH, FTP, HTTP or HTTPS services, you may change the default |
Port | service port by typing the new port number in the Server Port field. If you |
| change the default port number then you will have to let people (who wish |
| to use the service) know the new port number for that service. |
|
|
Timeout | Type how many minutes a management session (via the web configurator) |
| can be left idle before the session times out. After it times out you have to |
| log in with your password again. Very long idle timeouts may have security |
| risks. |
|
|
Apply | Click Apply to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the Save |
| link on the top navigation panel to save your changes to the |
| memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
32.10 Remote Management
From the Access Control screen, display the Remote Management screen as shown next.
| 297 |
|
|