Chapter 21 VLAN Stacking
21.4 Configuring VLAN Stacking
Click Advanced Applications > VLAN Stacking to display the screen as shown.
Figure 76 Advanced Application > VLAN Stacking
The following table describes the labels in this screen.
Table 54 Advanced Application > VLAN Stacking
LABEL | DESCRIPTION |
Active | Select this checkbox to enable VLAN stacking on the Switch. |
|
|
SP TPID | SP TPID is a standard Ethernet type code identifying the frame and indicates |
| whether the frame carries IEEE 802.1Q tag information. Choose 0x8100 or |
| 0x9100 from the |
| digit hexadecimal number from 0x0000 to 0xFFFF. 0x denotes a hexadecimal |
| number. It does not have to be typed in the Others text field. |
|
|
Port | The port number identifies the port you are configuring. |
|
|
* | Settings in this row apply to all ports. |
| Use this row only if you want to make some settings the same for all ports. Use |
| this row first to set the common settings and then make adjustments on a port- |
| |
| Note: Changes in this row are copied to all the ports as soon as you make |
| them. |
|
|
| 173 |
|
|