|
| Chapter 22 Multicast |
| Table 56 Advanced Application > Multicast > Multicast Setting (continued) | |
| LABEL | DESCRIPTION |
| Max Group | Enter the number of multicast groups this port is allowed to join. Once a |
| Num. | port is registered in the specified number of multicast groups, any new |
|
| IGMP join report frame(s) is dropped on this port. |
|
|
|
| IGMP Filtering | Select the name of the IGMP filtering profile to use for this port. |
| Profile | Otherwise, select Default to prohibit the port from joining any |
|
| multicast group. |
|
| You can create IGMP filtering profiles in the Multicast > Multicast |
|
| Setting > IGMP Filtering Profile screen. |
|
|
|
| IGMP Querier | The Switch treats an IGMP query port as being connected to an IGMP |
| Mode | multicast router (or server). The Switch forwards IGMP join or leave |
|
| packets to an IGMP query port. |
|
| Select Auto to have the Switch use the port as an IGMP query port if |
|
| the port receives IGMP query packets. |
|
| Select Fixed to have the Switch always use the port as an IGMP query |
|
| port. Select this when you connect an IGMP multicast server to the |
|
| port. |
|
| Select Edge to stop the Switch from using the port as an IGMP query |
|
| port. The Switch will not keep any record of an IGMP router being |
|
| connected to this port. The Switch does not forward IGMP join or leave |
|
| packets to this port. |
|
|
|
| Apply | Click Apply to save your changes to the Switch’s |
|
| Switch loses these changes if it is turned off or loses power, so use the |
|
| Save link on the top navigation panel to save your changes to the non- |
|
| volatile memory when you are done configuring. |
|
|
|
| Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
|
22.4 IGMP Snooping VLAN
Click Advanced Applications > Multicast in the navigation panel. Click the Multicast Setting link and then the IGMP Snooping VLAN link to display the
| 179 |
|
|