Chapter 22 Multicast
Table 60 Advanced Application > Multicast > Multicast Setting > MVR: Group Configuration
LABEL | DESCRIPTION |
Add | Click Add to save your changes to the Switch’s |
| Switch loses these changes if it is turned off or loses power, so use the |
| Save link on the top navigation panel to save your changes to the non- |
| volatile memory when you are done configuring. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
MVLAN | This field displays the multicast VLAN ID. |
|
|
Name | This field displays the descriptive name for this setting. |
|
|
Start | This field displays the starting IP address of the multicast group. |
Address |
|
|
|
End Address | This field displays the ending IP address of the multicast group. |
|
|
Delete | Select Delete All or Delete Group and click Delete to remove the |
| selected entries from the table. |
|
|
Cancel | Select Cancel to clear the checkbox(es) in the table. |
|
|
22.8.1 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the Switch belong to VLAN 1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the News and Movie channels) from the remote streaming media server, S. Computers A, B and C in VLAN 1 are able to receive the traffic.
Figure 85 MVR Configuration Example
188 |
| |
| ||
|
|
|