P-660H/HW/W-T Series User’ Guide

16.10 Configuring Class Setup

The class setup screen displays the configured bandwidth classes by individual interface. Select an interface and click the buttons to perform the actions described next. Click “+” to expand the class tree or click “-“to collapse the class tree. Each interface has a permanent root class. The bandwidth budget of the root class is equal to the speed you configured on the interface (see Section 16.9 on page 188 to configure the speed of the interface). Configure child-class layers for the root class.

Refer to Section 16.1 on page 182 for more information.

To add or delete child classes on an interface, click Media Bandwidth Management, then Class Setup. The screen appears as shown (with example classes).

Figure 94 Media Bandwidth Management: Class Setup

The following table describes the labels in this screen.

Table 57 Media Bandwidth Management: Class Setup

LABEL

DESCRIPTION

 

 

Interface

Select an interface from the drop-down list box for which you wish to set up classes.

 

 

Back

Click Back to go to the main Media Bandwidth Management screen.

 

 

Add Child-Class

Click Add Child-classto add a sub-class.

 

 

Edit

Click Edit to configure the selected class. You cannot edit the root class.

 

 

Delete

Click Delete to delete the class and all its child-classes. You cannot delete the root

 

class.

Statistics

Click Statistics to display the status of the selected class.

 

 

16.10.1 Media Bandwidth Management Class Configuration

Configure a bandwidth management class in the Class Configuration screen. You must use the Media Bandwidth Management - Summary screen to enable bandwidth management on an interface before you can configure classes for that interface.

Refer to Section 16.1 on page 182 for more information.

Chapter 16 Media Bandwidth Management Advanced Setup

190