P-660H/HW/W-T Series User’ Guide

CHAPTER 5

Wireless LAN

This chapter discusses how to configure the Wireless LAN screens for P-660HW or P-660W.

5.1 Wireless LAN Introduction

A wireless LAN can be as simple as two computers with wireless LAN adapters communicating in a peer-to-peer network or as complex as a number of computers with wireless LAN adapters communicating through access points which bridge network traffic to the wired LAN.

Refer to Section 5.3 on page 71 to configure wireless LAN settings.

Note: See the WLAN appendix for more detailed information on WLANs.

5.2 Wireless Security Overview

Wireless security is vital to your network to protect wireless communication between wireless stations, access points and the wired network.

Wireless security methods available on the Prestige are data encryption, wireless client authentication, restricting access by device MAC address and hiding the Prestige identity.

5.2.1Encryption

•Use WPA security if you have WPA-aware wireless clients and a RADIUS server. WPA has user authentication and improved data encryption over WEP.

•Use WPA-PSK if you have WPA-aware wireless clients but no RADIUS server.

•If you don’t have WPA-aware wireless clients, then use WEP key encrypting. A higher bit key offers better security at a throughput trade-off. You can use Passphrase to automatically generate 64-bit or 128-bit WEP keys or manually enter 64-bit, 128-bit or 256-bit WEP keys.

5.2.2Authentication

WPA has user authentication and you can also configure IEEE 802.1x to use the built-in database (Local User Database) or a RADIUS server to authenticate wireless clients before joining your network.

Chapter 5 Wireless LAN

70