Figure 149 Menu 15.2.1 NAT Server Setup
Menu 15.2 - NAT Server Setup
Rule Start Port No. End Port No. IP Address
1. | Default | Default | 0.0.0.0 |
2. | 21 | 21 | 192.168.1.33 |
3. | 0 | 0 | 0.0.0.0 |
4. | 0 | 0 | 0.0.0.0 |
5. | 0 | 0 | 0.0.0.0 |
6. | 0 | 0 | 0.0.0.0 |
7. | 0 | 0 | 0.0.0.0 |
8. | 0 | 0 | 0.0.0.0 |
9. | 0 | 0 | 0.0.0.0 |
10. | 0 | 0 | 0.0.0.0 |
11. | 0 | 0 | 0.0.0.0 |
12. | 0 | 0 | 0.0.0.0 |
Press ENTER to Confirm or ESC to Cancel:
4Enter a port number in an unused Start Port No field. To forward only one port, enter it again in the End Port No field. To specify a range of ports, enter the last port to be forwarded in the End Port No field.
5Enter the inside IP address of the server in the IP Address field. In the following figure, you have a computer acting as an FTP, Telnet and SMTP server (ports 21, 23 and 25) at 192.168.1.33.
6Press [ENTER] at the “Press ENTER to confirm ...” prompt to save your configuration after you define all the servers or press [ESC] at any time to cancel.
Figure 150 Multiple Servers Behind NAT Example
27.5 General NAT Examples
The following are some examples of NAT configuration.
261 | Chapter 27 Network Address Translation (NAT) |