P-660H/HW/W-T Series User’ Guide

5.7.4 Authentication Required: WPA-PSK

Select Authentication Required in the Wireless Port Control field and WPA-PSKin the Key Management Protocol field to display the next screen.

See Section 5.6 on page 77 for more information.

Figure 28 Wireless LAN: 802.1x/WPA:WPA-PSK

The following table describes the labels not previously discussed.

Table 18 Wireless LAN: 802.1x/WPA: WPA-PSK

LABEL

DESCRIPTION

 

 

Key Management

Choose WPA-PSKin this field.

Protocol

 

Pre-Shared Key

The encryption mechanisms used for WPA and WPA-PSKare the same. The

 

only difference between the two is that WPA-PSKuses a simple common

 

password, instead of user-specific credentials.

 

Type a pre-shared key from 8 to 63 printable characters (including spaces;

 

alphabetic characters are case-sensitive).

WPA Mixed Mode

The Prestige can operate in WPA Mixed Mode, which supports both clients

 

running WPA and clients running dynamic WEP key exchange with 802.1x in the

 

same Wi-Fi network.

 

Select the check box to activate WPA mixed mode. Otherwise, clear the check

 

box and configure the Group Data Privacy field.

Chapter 5 Wireless LAN

84