The following table describes the fields in this screen.
Table 10 Internet Access Wizard Setup: LAN Configuration
LABEL | DESCRIPTION |
|
|
LAN IP Address | Enter the IP address of your Prestige in dotted decimal notation, for example, |
| 192.168.1.1 (factory default). |
| If you changed the Prestige's LAN IP address, you must use the new IP |
| address if you want to access the web configurator again. |
LAN Subnet Mask | Enter a subnet mask in dotted decimal notation. |
|
|
DHCP |
|
|
|
DHCP Server | From the DHCP Server |
| assign IP addresses, an IP default gateway and DNS servers to computer |
| systems that support the DHCP client. Select Off to disable DHCP server. |
| When DHCP server is used, set the following items: |
|
|
Client IP Pool Starting | This field specifies the first of the contiguous addresses in the IP address |
Address | pool. |
Size of Client IP Pool | This field specifies the size or count of the IP address pool. |
|
|
Primary DNS Server | Enter the IP addresses of the DNS servers. The DNS servers are passed to |
| the DHCP clients along with the IP address and the subnet mask. |
Secondary DNS Server | As above. |
|
|
Back | Click Back to go back to the previous screen. |
|
|
Finish | Click Finish to save the settings and proceed to the next wizard screen. |
|
|
4The Prestige automatically tests the connection to the computer(s) connected to the LAN ports. To test the connection from the Prestige to the ISP, click Start Diagnose. Otherwise click Return to Main Menu to go back to the Site Map screen.
Figure 14 Internet Access Wizard Setup: Connection Tests
5Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning. Refer to the rest of this guide for more detailed information on the complete range of Prestige features. If you cannot access the Internet, open the web configurator again to confirm that the Internet settings you configured in the Wizard Setup are correct.
Chapter 3 Wizard Setup for Internet Access | 60 |