Table 159
LOG DISPLAY | PAYLOAD TYPE |
|
|
SIG | Signature |
NONCE | Nonce |
NOTFY | Notification |
DEL | Delete |
VID | Vendor ID |
Log Commands
Go to the command interpreter interface.
Configuring What You Want the Prestige to Log
1Use the sys logs load command to load the log setting buffer that allows you to configure which logs the Prestige is to record.
2Use sys logs category to view a list of the log categories.
Figure 263 Displaying Log Categories Example
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
ras>? |
|
|
|
Valid commands are: | ether | aux | |
sys | exit | ||
ip | ipsec | bridge | bm |
certificates | cnm | 8021x | radius |
ras> |
|
|
|
3Use sys logs category followed by a log category to display the parameters that are available for the category.
Figure 264 Displaying Log Parameters Example
ras> sys logs category access
Usage: [0:none/1:log/2:alert/3:both] [0:don't show debug type/ 1:show debug type]
4Use sys logs category followed by a log category and a parameter to decide what to record.
Appendix K | 418 |