Figure 99 System Status: Show Statistics
The following table describes the fields in this screen.
Table 63 System Status: Show Statistics
LABEL | DESCRIPTION |
|
|
System up Time | This is the elapsed time the system has been up. |
|
|
CPU Load | This field specifies the percentage of CPU utilization. |
|
|
LAN or WAN Port | This is the WAN or LAN port. |
Statistics |
|
Link Status | This is the status of your WAN link. |
|
|
Upstream Speed | This is the upstream speed of your Prestige. |
|
|
Downstream Speed | This is the downstream speed of your Prestige. |
|
|
This field displays the remote node index number and link type. Link types are | |
| PPPoA, ENET, RFC 1483 and PPPoE. |
Interface | This field displays the type of port. |
|
|
Status | For the WAN port, this displays the port speed and duplex setting if you're using |
| Ethernet encapsulation and down (line is down), idle (line (ppp) idle), dial |
| (starting to trigger a call) and drop (dropping a call) if you're using PPPoE |
| encapsulation. |
| For a LAN port, this shows the port speed and duplex setting. |
|
|
TxPkts | This field displays the number of packets transmitted on this port. |
|
|
RxPkts | This field displays the number of packets received on this port. |
|
|
Errors | This field displays the number of error packets on this port. |
|
|
Tx B/s | This field displays the number of bytes transmitted in the last second. |
|
|
Rx B/s | This field displays the number of bytes received in the last second. |
|
|
Up Time | This field displays the elapsed time this port has been up. |
|
|
Collisions | This is the number of collisions on this port. |
|
|
199 | Chapter 17 Maintenance |