P-660H/HW/W-T Series User’ Guide

5.7.1 No Access Allowed or AuthenticationSelect No Access Allowed or No Authentication Required in the Wireless PortControl field.

Figure 24 Wireless LAN: 802.1x/WPA: No Access Allowed

Figure 25 Wireless LAN: 802.1x/WPA: No Authentication

The following table describes the label in these screens.

Table 15 Wireless LAN: 802.1x/WPA: No Access/Authentication

LABEL

DESCRIPTION

 

 

Wireless Port

To control wireless station access to the wired network, select a control method from

Control

the drop-down list box. Choose from No Access Allowed, No Authentication

 

Required and Authentication Required.

 

No Access Allowed blocks all wireless stations access to the wired network.

 

No Authentication Required allows all wireless stations access to the wired network

 

without entering usernames and passwords. This is the default setting.

 

Authentication Required means that all wireless stations have to enter usernames

 

and passwords before access to the wired network is allowed.

 

Select Authentication Required to configure Key Management Protocol and other

 

related fields.

Back

Click Back to go to the main wireless LAN setup screen.

 

 

Apply

Click Apply to save your changes back to the Prestige.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

5.7.2 Authentication Required: 802.1x

You need the following for IEEE 802.1x authentication.

Chapter 5 Wireless LAN

80