Figure 182 Menu 23.2 System Security: RADIUS Server
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= No
Server Address= 10.11.12.13
Port #= 1812
Shared Secret= ********
Accounting Server:
Active= No
Server Address= 10.11.12.13
Port #= 1813
Shared Secret= ********
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 102 Menu 23.2 System Security: RADIUS Server
FIELD | DESCRIPTION |
|
|
Authentication Server |
|
|
|
Active | Press [SPACE BAR] to select Yes and press [ENTER] to enable user |
| authentication through an external authentication server. |
Server Address | Enter the IP address of the external authentication server in dotted decimal |
| notation. |
Port | The default port of the RADIUS server for authentication is 1812. |
| You need not change this value unless your network administrator instructs |
| you to do so with additional information. |
Shared Secret | Specify a password (up to 31 alphanumeric characters) as the key to be |
| shared between the external authentication server and the access points. |
| The key is not sent over the network. This key must be the same on the |
| external authentication server and Prestige. |
Accounting Server |
|
|
|
Active | Press [SPACE BAR] to select Yes and press [ENTER] to enable user |
| authentication through an external accounting server. |
Server Address | Enter the IP address of the external accounting server in dotted decimal |
| notation. |
Port | The default port of the RADIUS server for accounting is 1813. |
| You need not change this value unless your network administrator instructs |
| you to do so with additional information. |
Shared Secret | Specify a password (up to 31 alphanumeric characters) as the key to be |
| shared between the external accounting server and the access points. |
| The key is not sent over the network. This key must be the same on the |
| external accounting server and Prestige. |
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.
291 | Chapter 31 System Security |