P-2000W_V2 User’s Guide

Table 19 SIP Configuration (continued)

LABEL

DESCRIPTION

 

 

Registrar Server

Enter the SIP register server’s IP address or domain name in this field. You can

Address

use up to 95 ASCII characters.

 

Note: If you were not given a register server address, then enter

 

the address from the SIP Server Address field again

 

here.

Registrar Server Port

Enter the SIP register server’s listening port for SIP in this field.

 

Note: If you were not given a register server port, then enter the

 

port from the SIP Server Port field again here.

Register Expiry Time

This field sets how long an entry remains registered with the SIP register server.

(sec.)

After this time period expires, the SIP register server deletes the Prestige’s

 

entry from the database of registered SIP numbers. The register server can use

 

a different time period. The Prestige sends another registration request after

 

half of this configured time period has expired.

OPTIONS Interval

The OPTIONS Interval Timer periodically sends a signal to the SIP proxy server

Timer

to maintain the connection.

 

Type a time in minutes to send a KeepAlive signal to the SIP proxy server. The

 

default is 0, which disables this feature.

Session Expiry Time

Use this field to set the longest time that the Prestige will allow a SIP session to

(sec.)

remain idle (without traffic) before dropping it.

Display Name

Type a name to interoperate with other SIP devices. It is recommended to leave

 

the default setting for this field.

SIP Service Domain

Enter the SIP service domain name in this field (the domain name that comes

 

after the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended

 

set characters.

Authentication

 

 

 

Registrar Username

Type in the username exactly as supplied by your VoIP service provider.

 

 

Registrar Password

Type in the password associated with the username above exactly as supplied

 

by your VoIP service provider.

Registration Status

This displays either Registered or Not Registered depending on the success

 

of your Prestige’s connection to the SIP server.

APPLY

Click APPLY to save your changes without restarting the Prestige. Your

 

wireless LAN, Internet and SIP settings changes do not take affect until you use

 

RESTART (in the navigation panel).

CANCEL

Click CANCEL to begin configuring this screen afresh.

13.3 Voice Coding

A codec (coder/decoder) codes analog voice signals into digital signals and decodes the digital signals back into voice signals. The Prestige supports the following codecs.

13.3.1 G.711

G.711 is a Pulse Code Modulation (PCM) waveform codec. G.711 provides very good sound quality but requires 64kbps of bandwidth.

100

Chapter 13 Administrator Web Configurator Screens

VoIPon www.voipon.co.uk

sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

Page 100
Image 100
ZyXEL Communications P2000W manual Voice Coding, 13.3.1 G.711, 2000WV2 User’s Guide SIP Configuration