P-2000W_V2 User’s Guide
CH A P T E R 3
Wireless LAN Setup Menus
First you need to associate your Prestige with a Wireless LAN Access Point (AP). This provides your Prestige with the basic services for communication.
When you turn the Prestige on, it searches for available wireless LAN Access Points (APs). It selects the AP with the best signal and restarts and attempts to connect to it.
Use the following sections if you want to enter a WEP key or manually specify other wireless settings. The Prestige restarts when you return to the main screen after changing the wireless settings.
3.1 Site Survey
Do the following to browse the APs available in your area and select one.
1Select Wireless in the first menu screen (use the up or down arrow to highlight it and then press the Left key).
2Select Site Survey.
3The Prestige checks for and displays a list of available APs.
4An AP’s SSID (name) is followed by a number describing its relative signal strength. The higher the number, the better the signal. A “W” next to an AP’s name means that the AP uses WEP encryption Select an AP to use.
7.Wireless
8.Restart
1.Information
SelectBack
1.Site Survey
2.SSID
3.Network Mode
SelectBack
AP1 99 W
AP2 90
AP3 85
SelectBack
| Chapter 3 Wireless LAN Setup Menus | 33 |
|
VoIPon www.voipon.co.uk sales@voipon.co.uk | Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 | ||
