P-2000W_V2 User’s Guide
4Select a WEP key to configure.
5Select a keypad mode and use the keypad to enter the WEP key that the AP is using. Use the Power/End key to clear the default text and remove typos.
Press the OK key when you are done.
6You can configure up to four WEP keys (in the same manner as the first) but only one key can be selected (enabled) at any one time.
7Select Key Select.
8Select the key that the AP is using.
7.WEP key 1
8.WEP key 2
9.WEP key 3
SelectBack
WEP key 1
**********
Ok Aa1@ Clear
8.WEP key 2
9.WEP key 3
10.WEP key 4
SelectBack
11.Key Select
12.Profiles
13.Auth Type
SelectBack
Key 1
Key 2
Key 3
SelectBack
3.7 Authentication Type
Some APs require the wireless clients to send the WEP key to the AP for authentication.
| Chapter 3 Wireless LAN Setup Menus | 37 |
|
VoIPon www.voipon.co.uk sales@voipon.co.uk | Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030 | ||
