P-2000W_V2 User’s Guide

Table 7 STATIC

LABEL

DESCRIPTION

 

 

Get IP Address

Click STATIC to manually enter a fixed IP address.

Network Mode

Click DHCP to have the Prestige automatically obtain network settings at startup

 

from a Dynamic Host Configuration Protocol server. These settings are not

 

configurable.

 

Click PPPoE if your ISP uses Point-to-Point Protocol over Ethernet.

 

 

Network IP

This is the IP address your Prestige uses to connect to the wireless LAN. Type the

 

address given to you by your network administrator.

Network Subnet

The subnet mask specifies the network number portion of an IP address. Type the

Mask

subnet mask given to you by your network administrator. See the appendix for

 

information on subnetting.

Default Gateway

Type the gateway IP address of the device to which your Prestige is to connect.

 

 

MAC Address

Every Ethernet device has a unique MAC (Media Access Control) address. The

 

MAC address is assigned at the factory and consists of six pairs of hexadecimal

 

characters, for example, 00:A0:C5:00:00:02.

 

This field is read only and cannot be configured.

 

 

DNS Server IP

Type the DNS’ IP address for translating readable domain names into valid

 

computer IP addresses.

Second DNS

Type a backup DNS IP address for the Prestige to use in the event that the

Server IP

Prestige cannot connect to the preferred DNS.

APPLY

Click APPLY to save your changes without restarting the Prestige. Your wireless

 

LAN, Internet and SIP settings changes do not take affect until you use RESTART

 

(in the navigation panel).

CANCEL

Click CANCEL to begin configuring this screen afresh.

 

 

12.7 Network Configuration: DHCP

If you were not assigned a specific IP address for your Prestige, use the following directions to set your Prestige to get it automatically via DHCP (Dynamic Host Control Protocol).

76

Chapter 12 User Web Configurator Screens

VoIPon www.voipon.co.uk

sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

Page 76
Image 76
ZyXEL Communications P2000W manual Network Configuration Dhcp, Apply, Cancel