APC manual Snmp issues Battery Management System Management Card

Battery Management System

USER’S GUIDE

®

SNMP issues (Battery Management System

Management Card)

Problem	Solution
Unable to perform a GET	1. Verify the read (GET) community name.
	2. Use the Control Console or Web interface to ensure
	that the NMS has access. See Telnet/SSH.
Unable to perform a SET	1. Verify the read/write (SET) community name.
	2. Use the control console or Web interface to ensure
	that the NMS has write (SET) access. See Telnet/
	SSH.
Unable to receive traps at	Query the MIB mconfigTrapReceiverTable OIDs to
the NMS	verify that the NMS IP address is listed correctly, and
	that the community name defined for the NMS matches
	the community name in the table. If necessary, use SETs
	to the OIDs, or use the control console or Web interface
	to correct the trap receiver definition problem. See
	Telnet/SSH.
Traps received at an NMS	See your NMS documentation to verify that the traps are
are not identified	properly integrated in the alarm/trap database.

173