APC Battery Management System manual Event list format, Event mask settings

Battery Management System

USER’S GUIDE

®

Event list format

The evntlist.htm page defines the following for each event:

•Code: The event’s unique event code.

•Description: The text used for the event.

•Severity: The event’s default severity level.

•Configuration: The hexadecimal code that defines the actions to occur for the event and provides a link to the event mask that you use to configure the event.

See Event mask settings.

Event mask settings

From the evntlist.htm page, to reconfigure actions for an event:

1.Click the link (the current hexadecimal code) for the event.

2.Enter a new hexadecimal code as an event mask to reconfigure the bits that control the actions for the event.

3.Click Apply.

The bits are numbered 0 to 23, from left to right.

Bit 5 and bits 14 through 23 are unused. Make sure these bits are always set to 0.

89