APC Battery Management System manual Scp cert.p15 apc@156.205.6.185\sec\hostkey.p15

Battery Management System

USER’S GUIDE

®

Load the host key to the Management Card on the Battery Management System master controller. Perform these steps:

1.On the Network menu of the Web interface of the Battery Management System, select the Telnet/SSH option.

2.In the SSH User Host Key File section of the page, browse to the host key, the .p15 file you created in the procedure Create the host key. (The default location is C:\Program Files\American Power Conversion\APC Security Wizard.)

3.On the SSH Host Key Fingerprint section of the page, note the fingerprint for the version (or versions) of SSH you are using. Log on to the Battery Management System through your SSH client program, and verify that the correct host key was uploaded by verifying that these fingerprints match the fingerprints that the client program displays.

Alternatively, you can use FTP or Secure CoPy (SCP) to transfer the host key file to the Management Card. You must specify the correct location, \sec, on the Management Card. For SCP, the command to transfer a host key named hostkey.p15 to a Management Card with an IP address of 156.205.6.185 would be:

scp cert.p15 apc@156.205.6.185:\sec\hostkey.p15

144