APC Battery Management System manual Ftp open 150.250.6.10, Ftp put apchw02aos264.bin

Battery Management System

USER’S GUIDE

®

3.Type open and the Battery Management System’s IP address, and press ENTER. If the Port setting for FTP Server in the Network menu has changed from its default value of 21, you must use the non-default value in the FTP command.

a.For some FTP clients, use a colon to add the port number to the end of the IP address.

b.For Windows FTP clients, separate the port number from the IP address by a space. For example, if the Battery Management System Management Card’s FTP Server Port setting has been changed from its default of 21, such as to 21000, you would use the following command for a Windows FTP client transferring a file to a Battery Management System Management Card with an IP address of 150.250.6.10.

ftp> open 150.250.6.10 21000

4.Log on using the Administrator user name and password. (apc is the default for both.)

5.Upgrade the AOS. For example:

ftp> bin

ftp> put apc_hw02_aos_264.bin

6.When FTP confirms the transfer, type quit to close the session.

7.Repeat step 2 through step 6 for the application module. In step 5, use the application module file instead of the AOS module.

164