APC Battery Management System manual Name and Password settings, Http//171.215.12.1145000

Battery Management System

USER’S GUIDE

®

Option	Description
HTTP/HTTPS Port Configuration
HTTP Port	Identifies the TCP/IP port used for communications by HTTP with the
	Battery Management System. The default is 80.
	You can change the Port setting to the number of any unused port
	between 5000 and 32768 to enhance the protection provided by User
	Name and Password settings.
	You must then use a colon (:) in the command line to specify the non-
	default port number. For example, for a port number of 5000 and a
	Battery Management System IP address of 171.215.12.114, you would
	use this command:
	http://171.215.12.114:5000
HTTPS Port	Identifies the TCP/IP port used for communications by HTTPS with the
	Battery Management System. The default is 443.
	You can change the Port setting to the number of any unused port
	between 5000 and 32768 to enhance the protection provided by User
	Name and Password settings.
	You must then use a colon (:) in the command line to specify the non-
	default port number. For example, for a port number of 6502 and a
	Battery Management System IP address of 171.215.12.114, you would
	use this command:
	https://171.215.12.114:6502

55